Description
Product Features
- A handheld Ethernet tester for quick, automated verification of network connectivity and availability. Connect an RJ-45 or fiber cable (2000 model only) from the network hub or wall plate to the LinkRunner AT RJ-45 LAN or fiber port.
- Tests 10/100/1000 Mbps twisted pair and 100/1000 Mbps fiber optic Ethernet links
- AutoTest accurately identifies network problems in 10 seconds
- Features basic cable tests, Ethernet link and switch port identification, TruePower PoE, IP ping, TCP port open, IPv6 support, reflector option, 50 reports, Li Ion battery
- Includes Li Ion battery, cable identifier 1, LinkRunner Manager software.Supported Operating Systems:Windows Vista, Windows XP, Windows 7, Windows 8
Product Specifications
| Part Number | LRAT-2000 |
|---|---|
| UPC | 754082091271 , 779184005209 , 647367437140 |
| Brand Name | NETSCOUT |
| Connectivity Technology | usb |
| Connector Type | n/a |
| EAN | 0647367437140 , 0779184005209 , 0754082091271 |
| Included Components | Other Networking Devices |
| Item Weight | 1.12 pounds |
| Material | Not Applicable |
| Model Number | LRAT-2000 |
| Number of Items | 1 |
|---|---|
| Number of Sets | 72 |
| Size | LRAT-2000 |
| Special Features | Soft Case , Getting Started Guide |
| Specific Uses For Product | personal |
| Specification Met | No |
| Style | AT Copper and Fiber Ethernet Network Tester |
| UNSPSC Code | 43222643 |
| Warranty Description | Not Applicable |
From the manufacturer
NETSCOUT LRAT-2000 LinkRunner AT Ethernet Network Tester
The NETSCOUT LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. The AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
AutoTest accurately identifies network problems in 10 seconds
With a three-second boot-up and a one-button AutoTest that performs a customized set of connectivity tests in ten seconds, the LinkRunner AT enables quick and accurate problem identification to solve network problems fast. The AutoTest includes TruePower Power over Ethernet measurement, negotiation of link speed and duplex, discovery of switch port and VLAN information, negotiation of IPv4 and IPv6 addresses, availability of the gateway and the DNS servers, and the connection to user-defined devices and TCP applications. Save and share AutoTest profiles to standardize the troubleshooting process and create best practices.
Test twisted pair and fiber optic Ethernet links at Gigabit rates
Troubleshoot copper and fiber links with the integrated 10/100/Gig copper RJ45 and 100/Gig fiber optic SFP interfaces. Test twisted pair cables for length, shorts, opens or split pairs with a remote cable identifier, the built-in wiremap port or on non-terminated cables. Test fiber optic cables for continuity and received power. Digital and analog cable toning and switch port light blinking help locate and identify twisted pair cables. The optional office locator kit allows identification of up to six different RJ45 jacks.
Discover the nearest switch and VLAN
Using discovery protocol analysis (LLDP, CDP or EDP) the LinkRunner AT tester identifies the nearest switch and the VLAN IDs. Nearest switch information includes switch name, model, IP address, port/slot, speed/duplex (actual and advertised), signal strength, connection type (MDI or MDI/X), PoE voltage and power (actual and test limit), and a graphical representation of power on pairs.
Document test results
Run the LinkRunner Manager application to transfer saved test results from the tester to a Windows PC. Generate customize reports to close trouble tickets, escalate problems and prove acceptable connectivity. Use the management application to create and manage AutoTest profiles and to upgrade tester firmware.
The right LinkRunner AT for the job
The LinkRunner AT tester is available in two models: LRAT-1000 and LRAT-2000. The LinkRunner AT 2000 adds the following exclusive features: a fiber optic SFP interface, the TruePower PoE load test, IPv6 support, 50 results saved on the tester (versus 10) and a Li-ion rechargeable battery. The LinkRunner AT 2000 also features packet reflection facilitating use of the tester as a performance test remote device.
What's in the Box?
- LinkRunner AT 2000 Network Auto-Tester
- Rechargeable lithium-ion battery pack
- AC power adapter and line cord
- WireView Cable ID #1
- RJ45 coupler
- USB cable
- CD with LinkRunner Manager PC application
- Soft carrying case
- Instruction card
Product description
The NETSCOUT LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. The AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
Product detailsSize: LRAT-2000
|
Features
Similar Products
Liste vide