Baileigh VM-1258-3 Vertical Milling Machine, 3-Phase 220V, 5hp Motor, 80-3800 rpm Spindle Speed

Baileigh vertical milling machine. When need a vertical mill to hold a large job, a small wimpy mill won’t do. Need to step up to the VM-1258 from Baileigh Industrial. The VM-1258 vertical mill features a whopping 12-inches by 58-inches table, one of the largest you will find on a manual mill. This large oversized table isn’t just mounted on a wimpy machine to make it look larger. The whole machine has been built to reflect the size and weight that its table brings. In order to build a machine this big, rigidity has to come into the equation. Baileigh industrial uses only best castings as the starting point for their mills. The stronger make he platform the better the cutting is. A larger spindle is stronger and has tighter tolerances over a longer period of time. In order to spin a heavy duty spindle like that we decide to go with a Yaskawa inverter powered by a 5 hp 220 volt three phase motor. The inverter lets the operator chose his RPM from 0 to 3800 rpm. Being able to choose the correct rpm will make for longer lasting tooling and better cuts. Movement on the three axis are powered to make it easier on the operator. The X and Y axis also has a Mitutoyo digital read out as a standard feature. A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1258. Specifications - Spindle center to column minimum, maximum: 5.11-inches-21.65-inches; spindle diameter: 3-15/16-inches; spindle feed per rev: 0.0035-inches/0.07-inches/0.14-inches; spindle head swivel: 45-90 degrees; travel auto X axis: 36.22-inches; travel auto Y axis: 14.96-inches; travel auto Z axis: 17.71-inches; travel manual X axis: 36.61-inches; travel manual Y axis: 15.74-inches; travel manual Z axis: 17.71-inches; spindle nose to table minimum, maximum: 1.37-inches-19.09-inches; spindle taper: NST 40; table load capacity: 770 pounds; T slots: 0.625-inches; motor coolant: 1/8 hp; cross travel of ram: 16.53-inches; spindle travel: 5.51-inches.