| Part Number | 3730013 |
|---|---|
| Item Weight | 1 pounds |
| Package Dimensions | 9.9 x 6.3 x 2.7 inches |
| Item model number | ACD-45PQ |
| Batteries | 1 Nonstandard Battery batteries required. (included) |
| Item Package Quantity | 1 |
| Temperature Range | 0/50 degrees_celsius |
| Number of Handles | 1 |
| Display Style | Liquid Crystal Display (LCD) with a maximum reading of 1999 |
| Special Features | Automatic, positive implied, negative polarity indication |
| Batteries Included? | Yes |
| Batteries Required? | Yes |
| Average Battery Life | 4 hours |
Mô tả
Product Features
- Digital clamp meter measures alternating current (AC) to 600 amp, direct current (DC) voltage and AC voltage to 600 volts (V), resistance to 1,000 ohms, and frequency to 500 hertz (Hz)
- True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform
- Transformer clamp with 1" (26 mm) jaw opening measures current without touching or interrupting the circuit
- Measures real power, reactive power, apparent power, power factor, and kilowatt hour (kWHr) usage of single- or three-phase balanced or unbalanced power sources
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V
- Measurements: AC/DC Voltage up to 600V, AC current up to 600A, resistance, frequency power
- 3 phase unbalanced load measurement - calculation of the discrete single phase measurements
- Auto VA - auto selection of AC volts, DC volts or AC amps
- Ultra slim jaws accommodate conductors up to 1.02 (26mm) in diameter
- Optional PC interface capability (RS-232 KIT2)
From the manufacturer
Safety Certification:
All Amprobe tools, including the Amprobe ACD-45PQ, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe ACD-45PQ 600A Power Quality Clamp Meter with True-RMS
True-RMS Sensing
The Amprobe ACD-45PQ digital clamp meter is true RMS (root mean square) sensing, auto-ranging multimeter for measuring current, voltage, resistance, frequency, kilowatt hour usage, power factor, and real, reactive, and apparent power in industrial electrical testing applications. It has a clamp that measures alternating current (AC) to 600 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), resistance to 1,000 ohms, and frequency to 500 hertz (Hz). The clamp has two jaws that can close around an electrical conductor up to 1" (26 mm) in diameter to measure current without touching or interrupting the circuit. The meter measures real power, reactive power, apparent power, and power factor and records the kilowatt hour (kWHr) usage of a power source to provide data on the power efficiency of an electrical system. It can be used for power measurements on single- or three-phase balanced or unbalanced power sources. Automatic detection mode selects voltage, current, or resistance function based on input. The peak hold reading displays the maximum measurement of a current or voltage surge. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.
Features
Packed with Features!The Amprobe ACD-45PQ is a compact digital clamp meter capable of measuring power, energy and power factor on a single and three-phase systems (balanced and unbalanced). |
Accomodates Conductors up to 1.02"The clamp has two jaws that can close around an electrical conductor up to 1.02 (26mm) in diameter to measure current without touching or interrupting the circuit. |
True-RMS SensingThis digital clamp meter is also true-rms sensing takes reliable AC/DC voltages measurements up to 600V. |
What’s in the Box?ACD-45PQ TRMS digital clamp meter. (1) Set test leads. (1) K-type thermocouple probe. (2) 1.5V AAA batteries (instaled). Carrying case with belt loop. User Manual. |
Amprobe builds rugged, reliable test and measurement tools
Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
 |  | |
|---|---|---|
| Amprobe ACD-41PQ 1000A Power Quality Clamp Meter with Temperature | Amprobe ACD-45PQ 600A Power Quality Clamp Meter with True-RMS | |
| True-rms | ✓ | ✓ |
| AC Current | 40.00 A, 400.0 A, 1000 A | 40.00 A, 400.0 A, 600 A |
| DC Voltage | 600.0 V | 600.0 V |
| Continuity | ✓ | ✓ |
| Temperature | -58 °F → 572 °F (-50 °C → 300 °C) | |
| Frequency | 5.00 Hz → 500.0 Hz | 5.00 Hz → 500.0 Hz |
| Active Power | (W) 0 kW → 600.0 kW | (W) 0 kW → 600.0 kW |
| Power Factor | 0.10 → 0.99 | 0.10 → 0.99 |
| Total Harmonic Distortion (THD%) | 0.0 % → 99 % |
Đặc tính
Thương hiệu:
Amprobe
Hàng tương tự
Không có mục nào được xác định