QSC PLX1802 Lightweight Power Amplifier

$1,393.15
Shop3A VN
B000FJ9BJM
In Stock
+

Description

Product Features

  • Cooling design exhausts hot air out the front, keeping the rack cool
  • Flow-through heat sinks require no filters that could become clogged
  • Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. Bridge and parallel mode LED indicators
  • Speak on NL-4 output connectors provide a positive-locking speaker connection. Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers
  • 21-position front-panel gain controls for precise, repeatable amplifier adjustment

From the manufacturer

 
PLX2 '02 Models' Series-Wide Specifications:
  • Distortion (SMPTE-IM): < 0.02%
  • Distortion (typical) - 1/8 rated power, 20 Hz–20 kHz: < 0.02%
  • Distortion (typical) - Full rated power, 20 Hz–20 kHz: < 0.02%
  • Damping Factor (8Ω): > 500
  • Input Impedance: 10 kΩ unbalanced / 20 kΩ balanced
  • Input Clipping: 11 V rms (+21 dBu)
  • Cooling: Variable-speed fan, rear-to-front air flow
  • Input Connectors, each channel: 3-pin XLR and 1/4" TRS balanced, parallel
  • Output Connectors, each channel: Two Neutrik NL4 Speakon and four touch-proof binding posts. Both channels available on upper NL4 connector
  • Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection. Stable into reactive or mismatched loads
  • Load Protection: On/off muting, DC-fault power supply shutdown
  • Dimensions (Height, Width): 3.5" (8.9 cm); 2 RU 19" (48.3 cm)
  • Depth —Rack mounting surface to rear —Overall: 12.8" (32.6 cm), 14.875" (37.9 cm)
  • Weight—Shipping / Net: 26 lb (11.8 kg) / 21 lb (9.5 kg)
  • Agency Approvals: CE, FCC, cUL, UL

QSC PLX1802 Low-Z Power Amplifier

575 Watts/Channel into 4 Ohms, 900 Watts/Channel into 2 Ohms

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.

PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.

Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.

PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 pounds / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't 'sag' so bass notes stay full and powerful while the high end remains crisp and clean.

PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio 'turbocharging' that increases maximum power without affecting the basic audio quality.

  • Very light weight ('02' models, 21 lb / 9.5 kg)
  • Cooling design exhausts hot air out the front, keeping the rack cool. Flow-through heat sinks require no filters that could become clogged.
  • Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting. 02 models also feature bridge and parallel mode LED indicators.
  • Two Speakon NL4 output connectors provide positive-locking speaker connections. Upper connector provides both channel outputs on all four poles (Channel 1: 1+, 1-; channel 2: 2+, 2-) for bridged mono or for single-cable connection to bi-amplified speakers.
  • 21-position front-panel gain controls for precise, repeatable amplifier adjustment.
  • Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation.
  • Patented PowerLight power supply technology with other patents pending.
 

Four 02 Models: Power Ratings up to 1800 Watts per Channel at 2 Ohms, 3600 Watts Bridged at 4 Ohms

- Speakon NL4 and binding post outputs.

- Switchable/defeatable clip limiters.

- 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover.

- Switchable/defeatable 33 Hz infrasonic filters protect woofers from overexcursion damage.

 

QSC PLX2 SERIES

Premium quality, high-power amplifiers designed for the most demanding live performance uses.

 
 
 PLX1802PLX2502PLX3102PLX3602PLX1104PLX1804
PLX2 Power Amplifier Series 02 Model 02 Model 02 Model 02 Model 04 Model 04 Model
Power: watts per channel into 4 ohms 575 750 1000 1250 325 600
Power: watts per channel into 2 ohms 900 1250 1550 1800 550 900
Power: watts per channel bridged into 4 ohms 1800 2500 3100 3600 - -
Dimensions (HWD) inches 3.5 x 19 x 12.8 3.5 x 19 x 12.8 3.5 x 19 x 12.8 3.5 x 19 x 12.8 3.5 x 19 x 9.0 3.5 x 19 x 9.0
Dimensions (HWD) mm 89 × 482 × 326 89 × 482 × 326 89 × 482 × 326 89 × 482 × 326 89 × 482 × 228 89 × 482 × 228
  

Product description

style:PLX1802 575W Amp

The PLX1802 series is a premium quality, high-power amplifier designed for the most demanding live performance uses. Built on the third generation of QSC Power Light technology, the PLX1802 combines light weight, superlative audio quality and proven QSC reliability. With a power rating up to 1,800 watts, the PLX1802 is capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. The PLX1802 is the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. This model feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. The audio power circuitry inside the PLX1802 achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality.

Product information

style:PLX1802 575W Amp
Item Weight 27 pounds
Product Dimensions 24 x 6 x 18 inches
Shipping Weight 26.9 pounds 
Domestic Shipping Item can be shipped within U.S.
ASIN B000FJ9BJM
Item model number PLX1802
Date first listed February 2, 2006

Features

Brand:
QSC

Similar Products

No Items Defined